DLT

SDLT テープドライブ

SDLT220

Performance
Native sustained transfer rate	11 MB/s
2:1 compressed transfer rate	22 MB/s
Burst transfer rate SCSI bus	80 MB/s max
Native formatted capacity	110 GB
2:1 compressed capacity	220 GB
Cartridge load time to BOT, formatted tape	12 sec
to BOT, unformatted tape	40 sec
Average file access time	70 sec
Interfaces available	LVD, Ultra 2 SCSI, HVD, Ultra SCSI
Tape format
Recording format	448 track serial serpentine
Recording density	113 k bits / inch
Track density	896 tpi
Encoding method	Partial Response Maximum Likelihood (PRML)
Data compression	DLZ
Reliability
MTBF	250,000 hours at 100% duty cycle
Media durability	1,000,000 passes / 17,850 uses
Uncorrected error rate	1 x 10(17) bits read
Undetected error rate	1 x 10(27) bits read
Physical
Width	6.9" 175.26 mm
Height	6.3" 160.02 mm
Depth	12.8" 325.12 mm
Weight	13 lb 13 oz 6.27 kg
Environmental limits, operating
Temperature	50ｰ to 104ｰ F / 10ｰ to 40ｰ C
Non-condensing humidity	20% to 80%
Altitude	-500' to +30,000' max
Environmental limits, non-operating
Temperature	-40ｰ to 151ｰ F / -40ｰ to 66ｰ C
Non-condensing humidity	10% to 95%
Power
Voltage	+5V, +12V
Power consumption	26 Watts (average read / write operation)
Media compatibility
Super DLTtape I	110 GB native capacity
DLTtape IV - read only in SDLT 220	20, 35 or 40 GB native capacity
Tape life
Archive storage - with < 5% loss in demagnetization at 20ｰ C and 40% non-condensing humidity	> 30 years
Durability - average in typical office / computing environment	1,000,000 head passes

付属品

電源コード

TEL 0480-93-4590　　FAX 0480-93-2021　　info@keyton.co.jp